The Ins and Outs of Nano-Ceramic Coating Explained for Professionals in an Auto Detailing Career

auto detailing training

Nano-ceramic coating is a newer development in the auto detailing world, and it has really taken off. Every car owner wants their car to look better for longer, and a solid ceramic coating can do just that. Ceramic coating is essentially a super protective shield against dirt and grime, and will help to maintain the shine of a vehicle in the long term.

This chemical polymer solution can be used as both a permanent and semi-permanent coating to cater to any client’s needs. It won’t break down from normal weather conditions, such as rain or heat in the summer, making it a great option to protect the clear coat of any vehicle. It will also save vehicle owners time and money that they would normally spend on upkeep such as regular washes or waxing jobs. Keep reading to learn everything you need to know about nano-ceramic coating.

Key Benefits of Ceramic Coating

There are quite a few enticing options for choosing to apply a ceramic solution to a vehicle. Two key selling points are the added hardness and paint protection, both important factors to think about during your auto detailing course. Vehicle owners won’t have to worry about their clear coat peeling or their paint job corroding. The ceramic coat becomes a vehicle’s first defense against exposure to anything that could cause imperfections in the paint job.

Another benefit of a nano-ceramic layer is the hydrophobic nature of the coating. Whereas waxing can make car washing a headache due to its tendency to wear off, ceramic coatings are unaffected. The only way to remove this type of coating is through abrasion, followed by  another polishing and wet-sanding process. Washing your car becomes easier, and the fresh shine of the wash lasts longer due to the ability of the solution to resist dirt accumulation.

auto detailing career
Ceramic coating has many benefits, including paint protection, scratch reduction, and enhanced shine

Nano-Ceramic Coating Application for Anyone in Auto Detailing Training

In order to see the best results with a nano-ceramic coating job, some prep work is required prior to application. Before attempting to apply a layer to a vehicle, you’ll need to wash, clay, and polish the surface. You’ll also have to remove any imperfections in the paint job, otherwise the coating will lock in these flaws.

After the vehicle is prepped, you can start applying the polymer to the surfaces. This is typically done by hand, so your auto detailing training will really pay off as you apply the coating with care. Be sure to apply the nano-ceramic coat out of direct sunlight, which can derail the curing process and jeopardize the integrity of the coating. Once the entire surface is coated, the vehicle can then be brought into the sunlight to speed up the drying process. Make sure no water gets on the vehicle for the first 48 hours, and avoid car washes for the first 2-3 weeks to let the curing process finalize.

auto detailing course
Prepwork is required before application for best results using nano-ceramic coating

Best Aftercare and Maintenance Practices

A ceramic coating isn’t scratch proof, but it does reduce the impact that scratches have on the vehicle’s appearance, and protects the underlying  paint from getting scratched. You will want to know the best practices for handling a vehicle with a ceramic coating to ensure this protective layer stays as strong as possible. 

One of the most important pieces of after care is proper washing techniques. Be sure to use a soft microfibre towel that’s non abrasive. If you find there is a lot of dirt and debris collecting on the towel while washing, rinse the towel in a separate bucket of water to prevent it from mixing with the soapy water. This is crucial to prevent trapped dirt from creating marring or swirl marks that can penetrate the coating.

Ready to kickstart your auto detailing career?

Reach out to ATC Montreal for more information!

Form is submitting